Shanghai Puruifu Grinding Tools And Abrasives Co., Ltd.
Main products:Griding Wheel,Flap Disc,Sand Paper,Flap Wheel,Flexible Flap Disc
Contact Us
  • Contact Person : Mr. wang bo
  • Company Name : Shanghai Puruifu Grinding Tools And Abrasives Co., Ltd.
  • Tel : 86-21-39870516
  • Fax : 86-21-39870056
  • Address : Shanghai,Shanghai,No. 5,Xinhua Road Lane 345, ,Huaxin Town, Qingpu District, Shanghai
  • Country/Region : China
  • Zip : 201708

Synthetic Resin Adhesive for flap disc automatic machine

Synthetic Resin Adhesive for flap disc automatic machine
Product Detailed
1.quickly solidify, 2.high final bonding strength, 3.good ageing resistance, 4.low amount of spraying,etc

Technical characteristics

1. Should be poured the adhensive rapidly.

2. After pouring the glue ,Colloidal will spread fast , and the probability of emery cloth fall down is low.

3. High resin solid content , solidifying material has high bonding, high heat resistance and good toughness.


performance index




Test methods


Viscosity mpa·s80°C








Coated 170°C solity 2h


 Shearing strength in normal temperature ( mpa)





200°C Shearing strength (mpa)





non-volatile matter





Data of rewind in normal temperature




Method of use

1. Before use the  Synthetic Resin Adhesive need preheated  in ( 50-60 ) °C  for 60min, after installed on the machine the Synthetic Resin Adhesive temperature is 45-50°C.

2. After assemble the flap disc  should be put into  the oven with the temperature up to 130°C and heat preservation for 2h-3h . 



Colloidal packing 25kg per barrel, or can also be based on customers demand using non-standard packaging.



Colloid belongs to low toxic chemicals, should avoid entering eyes, oral.


Storage and packaging

1. Below 25°C storage, relative temperature under the condition of <70%, 6 months shelf-life, over shelf life after composite lattice can continue to use.

2. This product is not dangerous goods, according to the transport of chemicals in general.



The above performance data for the product to a temperature of 70%, temperature 25°Ctest of typical data, only to provide customers with the reference, and can not be fully guaranteed in a specific environment can achieve all the requirements, please customers use, based on the measured data.





Synthetic Resin Adhesive for flap disc automatic machine

Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.